Features 

• The unit shall have phase monitoring, where applicable. 

• The unit shall have power indicators for all phases. 

• The unit shall have high visibility ergonomic-grip yellow  handheld remote station that features: 

Quantity 4, 3-position directional switches. 

Triangular UP/DOWN LED indicators. 

Illuminated momentary GO switch. 

 Illuminated maintained KILL switch. 

A 10 foot integrated remote cable. 

Protective removable Lexan cover. 

• The unit shall have an IEC-rated phase reversing contactor assembly. 

• The unit shall have a Contactor Enable button to allow for local control at each hoist when using control pendants (pickles). 

• The unit shall have PCB mount electro-mechanical control relays. 

• The unit shall have recessed Branch-rated Square D QOU-Series circuit breakers. 

• The unit shall have a flexible form factor: 1 or 2 sided Motion Laboratories ATA Flight Case. 

• The unit shall have a linear power supply. 

• The unit shall have a modular panel design. 

• The unit shall be compatible with any manufacturer’s hoist. 

• The unit shall be compatible with Motion Laboratories automation systems, load monitoring systems and safety systems. 

• The unit shall be manufactured in the USA 

Physical Specifications 

All modular panels shall have a 19 inch rack width. All panels shall be made of .125 inch thick 5052 aluminum with a 1 inch flange and a black anodized finish. The unit shall be built into a 1 or 2 lid NEMA 1 Steel Liner, made from 14 gauge 1020 steel, with a protective Zinc chromate finish or a black satin fine texture powder coat. 

The unit shall be labeled with the following information, using diamond scratch etching, laser etching, and/or molecularly-bonded thermal ink: 

• Motion Laboratories name/trademark.

• Electrical and environmental ratings. 

• Power/Control wiring designation (Pinout). 

• All necessary safety information. 

• Optional customer logo.